Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 11 of 11

Thread: Engine mount tube thickness?

  1. #11
    Senior Member HighWing's Avatar
    Join Date
    May 2009
    Location
    Goodyear, AZ
    Posts
    1,743

    Default Re: Engine mount tube thickness?

    When I built my mount, I did some research that strongly suggested that - at least with - the Model IV I was working on was built with zero offset horizontally and vertically. That is what I went with. The airplane flies very similarly to my first IV. The picture I posted was essentially taken to establish the thrust line and where it should be located in its vertical relationship to the airframe.
    Last edited by HighWing; 03-14-2019 at 05:27 PM.
    Lowell Fitt
    Goodyear, AZ


    My You Tube Channel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •