Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: Mdl 4 to mdl5 flooring change

  1. #1
    pakitdvr's Avatar
    Join Date
    Jun 2013
    Location
    Lancaster pa
    Posts
    24

    Default Mdl 4 to mdl5 flooring change

    Does anyone have the floor stick area just before the seat. The ramp around the stick, pic I want to carpet the floor and boot the stick. Would like to see how it’s attached

  2. #2
    pakitdvr's Avatar
    Join Date
    Jun 2013
    Location
    Lancaster pa
    Posts
    24

    Default Re: Mdl 4 to mdl5 flooring change

    I was thinking of making some light weight ply ramps that attach to front seat allowing stick to protrude through. Covering with carpet and boots arround stick. Any ideas?

  3. #3
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Mdl 4 to mdl5 flooring change

    I don't have pictures handy but there are welded tabs on the cross members that you drill into.
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

  4. #4
    pakitdvr's Avatar
    Join Date
    Jun 2013
    Location
    Lancaster pa
    Posts
    24

    Default Re: Mdl 4 to mdl5 flooring change

    Thank you guess I'll have to do a work around so I don't have to weld

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •