Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: Whelen A-600 Strobe/Marker light question

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Maverick's Avatar
    Join Date
    Mar 2017
    Location
    Phoenix
    Posts
    295

    Default Whelen A-600 Strobe/Marker light question

    I am working on my panel and trying to figure out how many switches I need.

    In the attached picture of my strobe/marker lights you can see three sets of wires. The two blue wires and the set of red and black wires from the green marker light are part of the question. Since the rear facing white light (blue wires) has no polarity, can I just connect one of the blue wires to the black wire and the other to the red wire and run them both through a single switch? Or, does the rear facing white marker light have to have it's own circuit?

    Thanks in advance for input.
    Maverick
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •