-
Flap lever detent design
Hello all , I have a KF iv 1200 Classic and would like a more positive flap lever detent system, I have a Teflon plate with groves at three points which is more a visual guide, if anyone has a proven design I would appreciate it as there’s no point in me re-designing the wheel.
Thanks all .
Iain (Scotland)
-
Senior Member
Re: Flap lever detent design
I will get more pics since this one is from before I added the locking mechanism, but there is a spring loaded rod going through the flap handle with a small bolt coming out the side that locks into detents formed into the radius of the bracket shown in the pic. I'll get some more pics tonight.
-
Super Moderator
Re: Flap lever detent design
My flap handle mod. Including an extension and gate. I have a trim tab on the elevator so trimming with the flapperons is not needed.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
-
Senior Member
-
Re: Flap lever detent design
Hi all,
Thanks for your prompt and constructive replies , the one with the positive detents is good but I also like the extended lever with detents as I have short arms,
Thank you all again.
Iain D
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules