PM sent - thanks for doing this for us. Darrel
PM sent - thanks for doing this for us. Darrel
See my build log at:http://www.mykitlog.com/lowandslow/
I talked to Jeff. For Canadian buyers, the shipping cost will be $35 instead of $12.
--Brian
Flying - S7SS
I didn't see your original post to know if these would fit a Model IV. If so, I'd like to order a set.
Thanks,
Stan Specht
Model IV with 912ul
I have them in my 7 and they are AWESOME!
The shade is 33" wide and 25" long. Measure your model 4 and see if this will work.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Did you get yours yet Jim? I kind of feel bad that you missed the $50 by such a narrow margin.
As for the IV, if you need a different size, I'm pretty sure we can order what you need if you measure. As a disclaimer: I'm just facilitating the group buy, I don't personally guarantee the fit in anyone's airplane.
--Brian
Flying - S7SS
I made a modification to mine by simply calling Jeff at Koger. He accommodated me without question. I simply advised him that I was one of the group purchasers with Brian. He took notes and is just waiting for Brian to place the order.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Brian, yes I just received mine. It looks like a quality product and the installation looks very easy, probably about 20 minutes. Will get it installed this weekend; will post photos.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
I measured my Model IV today and the 33" would be too wide. Mine measures about 31 1/2". So, Brian, if you could order me one about 30 1/2" wide, please do so. However, I don't know how to PM or send PayPal. If you could PM me with your address I'll send you a check tomorrow. Thanks!!
Stan Specht
Model IV Speedster
Last edited by sourdostan; 10-10-2018 at 04:04 PM.
I installed my Kroger shade today. Went very quick and easy. Made a flight with it and am very pleased; it fits up tight against the skylight, adjusts back and forth very smoothly, and looks great. If I were to tweak its size any, I would add 1" to the present 33", and add 1" to the present 25" length. No big deal but the added inch would be perfect in my view for an SS7 Kitfox. It does not cover up the fuel sight gauges; they are still very visible.
The photos show the complete assembly before installation (red rectangles are the double stick tape), the center channel, sliders close-up, center channel installed, final assembly with the shade fully retracted, 1/2 retracted, and full on.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS