Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 15

Thread: Tail dragger deck angle

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 08-13-2018, 02:05 PM #1
    Esser
    Esser is offline
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Tail dragger deck angle

    I haven’t measured since I put my 26 ABW on. I was at 13.5 degrees. I’m probably at around 16 deg. Now
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3
    Reply With Quote Reply With Quote
  2. 08-13-2018, 03:09 PM #2
    jmodguy
    jmodguy is offline
    Senior Member jmodguy's Avatar
    Join Date
    Jul 2014
    Location
    Carmel, IN
    Posts
    744

    Default Re: Tail dragger deck angle

    Josh
    I was right at 13 deg with the Desser 22's, stock 3 leaf tail spring and a Matco 9" tailwheel. If I go with 29s for next set of mains I'll prob be back around 13 deg or so.
    Jeff
    KF 5
    340KF
    Reply With Quote Reply With Quote
  3. 08-13-2018, 08:34 PM #3
    AirFox
    AirFox is offline
    Senior Member AirFox's Avatar
    Join Date
    Feb 2012
    Location
    Portland, Or
    Posts
    420

    Default Re: Tail dragger deck angle

    My 7SS with the Shock monster on 26" ABW and T3 Tailwheel spring sits at 14 deg. I just put 29"s ABW on so it may have increased a small amount. I'll check.
    Scott Noble
    Kitfox SS7
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules