At AirVenture this year, I stopped by the Orotex booth and looked the aircraft that were parked there to demonstrate their product. I also examined several other covering/finishing systems, even did about 8 hours at the Stewart Systems seminar in the Fun Zone.
The finish on the aircraft at the Orotex booth did not show their product in a good light. The finishing in the edges, cracks and corners of the surfaces looked rough. One aircraft had trim paint over some of the Orotex covering with some bleed through on the mask lines (especially at the tapes). The taping edges, as stated, looked sharp and a place for dirt/debris to collect.

Just my observations.

Ralph