Originally Posted by
avidflyer
I don't know of any drawings for the brackets. If I was doing it, I would use 1/2" conduit for the brackets that hold the wing to the tail of the plane, and 3/4" conduit to attach the front spar to the lift strut attachment point. Here are some pics of my Kitfox 1. If you are going to trailer the plane with the wings folded, support the back of the plane rather than just letting it ride on the tail wheel. Also, tie the flaperons together by the tail just incase a wing bracket was to come loose. It has happened. :-( You should also make some gust locks to keep the tailfeathers from flopping the wind, especially if you tow the plane backwards. 1/4 boards with foam rubber on the inside works good. Two on the elevator and one on the rudder. Maybe tape a towel or foam rubber to the flaperons so they don't rub on the verticle stabilizer or rudder as well. JImChuk