Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: spinner

  1. 10-12-2009, 10:41 AM #1
    wannafly
    wannafly is offline
    Senior Member
    Join Date
    May 2009
    Location
    Lethbridge, Alberta
    Posts
    270

    Default

    want to put a spinner on my IVO medium in flight adjustable. What are you guys using and where did you get it? I have the brushes to contend with as well or does your spinner end at the blades? suggestions.....

    I searched spinners on this site and not much came up
    Reply With Quote Reply With Quote
  2. 10-13-2009, 07:14 AM #2
    Mark
    Mark is offline
    Super Moderator Mark's Avatar
    Join Date
    Jun 2008
    Location
    Boise, ID
    Posts
    111

    Default Re: spinner

    I have an IVO medium, also. I used a standard BN-2 spinner and polished it. Kitfox Aircraft has a predrilled back-plate and also sells a brush kit that goes through the 912 gear box which wires directly to the prop motor - no need to use the brush rings on the prop mount stack. Works great with no brackets.
    Mark & Renee Smith
    Boise, ID
    "Build It ..."
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules