Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Lift Strut Wood Fairing

  1. #1
    Bluebird19kf's Avatar
    Join Date
    Aug 2017
    Location
    Kendallville, IN
    Posts
    94

    Default Lift Strut Wood Fairing

    On my model 3 lift struts the fairing is wood and part of it needs re attached. I can't find in the manual what it is glued on with. I was going to use hysol but the old stuff doesn't look like hysol. It looks more clear, like a fiberglass resin. Does anyone have suggestions on what I should use?

  2. #2
    Senior Member HighWing's Avatar
    Join Date
    May 2009
    Location
    Goodyear, AZ
    Posts
    1,743

    Default Re: Lift Strut Wood Fairing

    This is what I use. I always have it on hand for the misc. Airplane projects plus the many things needing a strong adhesive around the house. For proportioning, I use a digital scale - .001 oz. accuracy - and a syringe for the hardener. It might also be available in smaller quantity tubes.
    Hysol EA-9430
    Lowell Fitt
    Goodyear, AZ


    My You Tube Channel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •