Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: ADS-B (in) and Transponder Antennae

  1. #1
    Senior Member aviator79's Avatar
    Join Date
    Dec 2016
    Location
    Los Alamos, NM
    Posts
    645

    Default ADS-B (in) and Transponder Antennae

    Does anyone know where the factory is putting these on the SLSAs? The fuselage frame has a couple antenna plates on the belly, but they appear to be closer than the recommended distance for ADS-B to Transponder. There are pretty obvious locations for the COM antenna on the top of the fueselage and the ELT inside. I was just curious if the factory had specific mount points for ADS-B and transponder.
    --Brian
    Building SS7

  2. #2
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    1,940

    Default Re: ADS-B (in) and Transponder Antennae

    Transponder I think is being out right behind the header tank. Not sure about ads-b
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

  3. #3
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    163

    Default Re: ADS-B (in) and Transponder Antennae

    Mike is not SLSA, itís experimental. I have the Dynon Skyview system and I mounted my transponder antenna and ADSB antennas on the plates on the bottom of the fuse. I have no issues after 60 hours. I flew the 1 hour test in a class B veil and the FAA report came back with no errors.
    -Mike Kraus
    RV-4 built and sold
    RV-10 built and flying
    Radial KitFox SS7 built and flying

  4. #4
    Senior Member aviator79's Avatar
    Join Date
    Dec 2016
    Location
    Los Alamos, NM
    Posts
    645

    Default Re: ADS-B (in) and Transponder Antennae

    Thanks for the PIREP Mike. I was considering that, but had read that the antennae should be 5' apart.
    --Brian
    Building SS7

  5. #5
    fastfred's Avatar
    Join Date
    Nov 2016
    Location
    herkimer,ny
    Posts
    134

    Default Re: ADS-B (in) and Transponder Antennae

    does the dynon have the ads-b out built into it?

  6. #6
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    163

    Default Re: ADS-B (in) and Transponder Antennae

    Quote Originally Posted by fastfred View Post
    does the dynon have the ads-b out built into it?
    You need to have the Dynon transponder and the Dynon ADSB module. Both are remote units and the functionality is integrated into the SkyView display.
    -Mike Kraus
    RV-4 built and sold
    RV-10 built and flying
    Radial KitFox SS7 built and flying

  7. #7
    Senior Member aviator79's Avatar
    Join Date
    Dec 2016
    Location
    Los Alamos, NM
    Posts
    645

    Default Re: ADS-B (in) and Transponder Antennae

    Quote Originally Posted by N213RV View Post
    You need to have the Dynon transponder and the Dynon ADSB module. Both are remote units and the functionality is integrated into the SkyView display.
    To clarify, the most recent Dynon transponders are Mode-S with ADS-B out. So the "out" functionality is integrated with the transponder. To get ADS-B IN, you need an additional receiver that needs its own antenna.
    --Brian
    Building SS7

  8. #8
    fastfred's Avatar
    Join Date
    Nov 2016
    Location
    herkimer,ny
    Posts
    134

    Default Re: ADS-B (in) and Transponder Antennae

    Can you list every thing we need to order to build this set up?

  9. #9
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,088

    Default Re: ADS-B (in) and Transponder Antennae

    For Dynon ADS-B out:
    -Dynon Mode S transponder
    -Dynon SV-2020 GPS antenna puck

    For Dynon ADS-B in:
    -SV-ADSB-472 module
    -A separate dedicated antenna (Dynon sells one; it is nearly identical to a transponder antenna)

    All integrates with the Dynon Skyview panel.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  10. #10
    Senior Member aviator79's Avatar
    Join Date
    Dec 2016
    Location
    Los Alamos, NM
    Posts
    645

    Default Re: ADS-B (in) and Transponder Antennae

    A Skyview display, two transponder antennae, coax and connectors, plus the following:

    Disclaimer: You should call and discuss with Dynon. They'll ensure you get exactly what you need.

    http://www.dynonavionics.com/mode-s-transponders.php

    http://www.dynonavionics.com/adsb-du...ceiver-472.php

    http://dynonstore.com/#!/SV-HARNESS-...egory=19307715

    http://dynonstore.com/#!/SV-HARNESS-...egory=19307715
    --Brian
    Building SS7

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •