Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Stabilizer Trim Slot Closeout

  1. #21

    Join Date
    Mar 2014
    Location
    Maypearl, TX
    Posts
    5

    Default Re: Stabilizer Trim Slot Closeout

    Great Idea. I put a brush seal on the hangar door and the wife's garden shed before winter hit. I had some scraps that were just right. I used this stuff off of ebay.

    https://www.ebay.com/itm/Brush-Seal/...72.m2749.l2649
    Jim Morrison
    Maypearl, TX

  2. #22
    Senior Member
    Join Date
    Jun 2008
    Location
    wales,ny
    Posts
    710

    Default Re: Stabilizer Trim Slot Closeout

    Jim, that looks very similar to the brush strip I used from Mcmaster Carr. As a side note, I had a good opportunity to test the effects of the finished product as it was 19 degrees yesterday when i went flying. Its hard to quantify the reduction in airflow that I used to get on the back of my head and neck , but i would say it has been cut down by 75% with the brush closeout. I used to velcro a cordura curtain between the cockpit and baggage area to block the flow , but won't have to do that anymore. Bruce N199CL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •