Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Results 1 to 5 of 5

Thread: Garmin servo

  1. #1
    Senior Member Flybyjim's Avatar
    Join Date
    Jul 2013
    Location
    Marysville, Pa.
    Posts
    453

    Default Garmin servo

    The garmin servos have a safety stop that is screwed to the servo to stop the arms from going over center. Anyone have photos of the final mounting location. I do not have my wiring harness yet to try to see how this all works out. I am concerned with the roll servo stop arms as I can not get a full travel for left aileron before hitting the stop on the servo.

  2. #2
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    1,653

    Default Re: Garmin servo

    They are temperamental. One of mine is mounted to the underside of the baggage floor. The other is on the frame behind the pilot seat. Although you don't see the safety on one of these, I have got them mounted on both now. I had to accept that on one of them, just as full travel stop occurs, the safety is contacted. In fact, I believe I took a file to the safety to gain 1/16". When the travel stops, my control arm barely touches the safety. I took so little material off that you don't even really notice that I did it.
    Eddie
    Attached Images Attached Images

  3. #3

    Default Re: Garmin servo

    Just trying to keep similar question in same thread here... but what about yaw servo? I've found a few references to people with them installed, but where and how?

  4. #4
    Senior Member Flybyjim's Avatar
    Join Date
    Jul 2013
    Location
    Marysville, Pa.
    Posts
    453

    Default Re: Garmin servo

    Yes, let's keep this on task. I am looking for anyone who has installed these on a super S7. I am not at final rigging yet but I want to set these before covering. Any help out there?

  5. #5

    Default Re: Garmin servo

    So I put my search skills to the test. The first link here is how the YAW servo is setup in an RV-10 with garmin.

    http://www.vansairforce.com/communit...d.php?t=119555

    This is another garmin DIY YAW connection.

    https://www.youtube.com/watch?v=RVw4D5_vYow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •