Speak of the devil and he shall appear. I just received my jury strut fairing Lowell did an amazing job. They are incredibly nice and are extremely light weight. I think this is a no brainer mod.
Speak of the devil and he shall appear. I just received my jury strut fairing Lowell did an amazing job. They are incredibly nice and are extremely light weight. I think this is a no brainer mod.
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
Have any pictures Josh?
Scott Noble
Kitfox SS7
I’ll take some this morning. I’m having a hard time posting pictures that are big enough to see detail ever since photo bucket went down. I’ll see what I can do.
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
Hopefully you can see enough detail. I just weighed them. 1.1oz each or 33g
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
Thanks Josh! Now I want some. Why do you have so many?
Scott Noble
Kitfox SS7
Ah sorry, It must be confusing because this is in the stabilizer strut fair thread but these are for the jury struts. The front, back, and diagonal. X2 for a total of 6.
Quite a bit will be trimmed off so they will be lighter yet, but then add paint and hysol. I bet total installed weight will be less than 8oz total
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
Looks nice. What is the chord length overall front to back?
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
09DD2BE6-7B00-4C6E-BA32-1D129AC9182A.jpg
My horizontal struts with glass fairings installed, primed, sanded and ready for paint.
302A995C-CF62-474F-B67F-7930DA52F843.jpg
Horizontal stabilizer struts and jury struts faired. Jury struts not yet final sanding completed. All fairings were two layers of very lite hand layed up glass. Came out great. The yellow sprayed on primer is for filling pin holes.
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear