Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: V6 comm wiring

  1. #1
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default V6 comm wiring

    For anyone who has wired up the MGL V6 comm, if I hook up the audio input HI to the EFIS audio cable, what do I with the audio input LO wire that is next to the HI?
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

  2. #2

    Join Date
    Apr 2012
    Location
    Oak Harbor,Wa
    Posts
    168

    Default Re: V6 comm wiring

    On most radio installations it is not necessary to connect audio low as the audio low goes to case ground inside the radio. Are you using the V6 internal intercom or do you have a separate intercom? I assume the connection of EFIS is the alarm audio out of the EFIS into the V6 intercom?? To be sure contact the MGL support people.

  3. #3
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: V6 comm wiring

    Using the V6 and it’s internal intercom. Yes the audio in is for alerting function. Matt from MGL called me back while I was driving and said I didn’t have to hook it up. Although I think as driving so I couldn’t be take notes!
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •