It has been a while since I posted any photos so here it goes. Made some head way tonight on the door and window frames.
It has been a while since I posted any photos so here it goes. Made some head way tonight on the door and window frames.
Oh what fun that was. You should have seen my cut angle at the bottom of the door.
I'm with Eddie. I spent a loooong time on this and ended up using a joiner piece to connect sections together - my corner cuts weren't all that flash either. Photos attached FYI.
David
SS7 Builder
Thanks for sharing your photos. I scratched my head for a while working this out, not finished yet. Filler will make things look good in the end!
Several years ago John McBean posted a series of photos in his album section, showing how the factory approaches the door angle installation. I found them quite helpful. Try this link: http://www.teamkitfox.com/Forums/alb...&pictureid=562
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Yep, same here. And the mitre cut in one of the photos was taken before I also added filler !. It looks quite presentable now .. It's really weird because you're actually working in two different planes when you do these intersections between the door and the triangular windows at that fuselage stringer. You'll sort it with a bit more head scratching ...
David
SS7 Builder
Thanks guys,
I like the new door frames as they wrap all the way around the box tubing making for a nice tight fit, clamping will still be needed when setting with hysol.
Jim