Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: adjustable rudder pedals

  1. #11
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default Re: adjustable rudder pedals

    I think Josh forgot to post a picture.

  2. #12
    Senior Member rv9ralph's Avatar
    Join Date
    Aug 2014
    Location
    Greenleaf, ID
    Posts
    618

    Default Re: adjustable rudder pedals

    Maybe Josh is still at work.

  3. #13
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: adjustable rudder pedals

    Unfortunately still at work for an hour!
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

  4. #14
    Senior Member Maverick's Avatar
    Join Date
    Mar 2017
    Location
    Phoenix
    Posts
    295

    Default Re: adjustable rudder pedals

    Ralph, I didn't know about the manual. It has the special instructions. Thanks all for your help.
    Maverick.

  5. #15

    Join Date
    Dec 2016
    Location
    Pennsburg,Pa
    Posts
    14

    Default Re: adjustable rudder pedals

    Quote Originally Posted by Esser View Post
    I don't have a great picture showing this but hopefully these pictures help...
    I know this is old tread but perhaps I can get a response. Are the AN3 bolds supposed to go through the 5/16" spacers. I can't see the spacers in this pic. If so they need to be drilled out?

  6. #16

    Join Date
    Dec 2016
    Location
    Pennsburg,Pa
    Posts
    14

    Default Re: adjustable rudder pedals

    I am referring to Page 41 in series 7 manual. Bushings p/n 81515 5/16". If the an3 hw is supposed to go through these, they need to be drilled out? Also, why are there 6 bushing?

  7. #17
    Senior Member
    Join Date
    Aug 2008
    Location
    Harvard, IL
    Posts
    337

    Default Re: adjustable rudder pedals

    I'll see if I can't help sort this out. Assuming you are talking about the adjustable rudder detent bracket (pg 37 in on-line manual), the AN3 does indeed go thru the bushing/spacer. They are tight if I remember correctly ( I'm building a 5). There are 6 bushings because 2 are used on the flap detent bracket. Hope this helps.

    Rick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •