Looks like you have everything you need except the handle detent brackets. You are going to need to cut down your horns on your rudder torque tubes. Those pulleys go on the torque tubes now. You will need to fabricate a piece of strapping so the cables can in advertently jump off the pulleys.

What happens is the cable comes from the rudder, goes around the pulley, and connects to the handle. You will need to make brackets for the indent of those handles that will be almost identical to the flap handle bracket except 5 positions instead of 3.

Set up your cables so the rudder is as close to the firewall as you want it when the handle is in the most forward position. Once that is set, when you pull on the handle, the pedals will move closer. I hope this explanation makes sense.