Since the instructions did not call out a specific torque on the nyloc nut it seems I may have tightened it enough to cause the cable to deform the brass bushing. I loosened the nut 1/8 turn and it now floats freely. Fixed.
Eddie
Since the instructions did not call out a specific torque on the nyloc nut it seems I may have tightened it enough to cause the cable to deform the brass bushing. I loosened the nut 1/8 turn and it now floats freely. Fixed.
Eddie
Will check mine as well. It could simply be over torqued.
Thanks for all the help and advice everyone. Hopefully this is the answer.
Thanks John. I guess I overlooked the Rotax manual. It is odd to me that they use a nylock nut on an engine component.
Eddie