OK,
I am busted - I see the reference Jim showed has drilled 80 mm
OK,
I am busted - I see the reference Jim showed has drilled 80 mm
Dave S
Kitfox 7 Trigear (Flying since 2009)
912ULS Warp Drive
St Paul, MN
Thank's again...That is what i need..but for 912 ul,i need nut on the other side of the flange..maybe im to stupid 😜.. but i cant find $&@" nut for That bolts.. i write...m8x1.25.. m8 ....1.25 ??? Nothing
What is a right way to find a nut?
Many thank's
JF
JF - Got mine ordered from a local Fastenall store - they might also have an on-line source and likely other companies do also - I ordered a bag of 50 or so of the m8x1.25 nylock nuts figuring I would not reuse them more than once.
Dave S
Kitfox 7 Trigear (Flying since 2009)
912ULS Warp Drive
St Paul, MN
Hi JF...
Google search with "M8 x 1.25 nut" and you will get a lot of results.
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
Roger!!!
Thank's
That is really help
Jf
yes......it is hard to find that nut..i oder 50x from ebay ,but they are black plated..
thank's guy's
I bought a half dozen from the local Lowes Building Center, found them in the metric section. My prop flange had threads in it, so these (Chinese?) bolts were probably plenty good enough. Actually, when you think about it, a lock nut on a hiem joint is just a regular nut..... I would rather have a locking type nut on the prop though. JImChuk