Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: 2017 Fly-In Flight Following

  1. #1
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    2,761

    Default 2017 Fly-In Flight Following

    For those of us who are flying to the Factory Fly-In here is a thread to share your tracking maps for your PLBs.

    Deleted

    We are looking to head out either Monday or Tuesday depending on weather.


    **Please**
    Courtesy dictates that you not share these links around too much. There is personal data on them. I will delete this thread once everyone is home again.
    Last edited by Av8r3400; 09-08-2017 at 03:19 PM.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  2. #2
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: 2017 Fly-In Flight Following

    Here's mine: [Deleted]
    Last edited by Av8r3400; 09-08-2017 at 03:20 PM.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  3. #3
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    620

    Default Re: 2017 Fly-In Flight Following

    Deleted


    It will be active starting Monday, August 28th, when I hope to launch.
    Last edited by Av8r3400; 09-08-2017 at 03:19 PM.
    -- Paul S
    Model III SN910
    582 IVO Med

  4. #4
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,196

    Default Re: 2017 Fly-In Flight Following

    Larry, looks like you have left out. Can you give us your route that you plan on taking?
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

  5. #5
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    2,761

    Default Re: 2017 Fly-In Flight Following

    Day 1: KRRL - Merrill WI to KUBE - Cumberland WI to KMOX - Morris MN to KMBG - Mobridge SD.

    5.9 hours flight time, 23.171 gallons mogas/Swift. 3.9 gph average.

    Traveling pretty light throttle, 4500-4800 rpm because I'm flying with an Avid mk4 which is an 85-90 mph airplane.

    We hope to make Columbus Montana tomorrow where Av8rSed can catch up. There is a TFR between Big Timber and Livingston we need to deal with then it's less hassle the rest of the way in.
    Last edited by Av8r3400; 08-28-2017 at 07:25 PM.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  6. #6
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: 2017 Fly-In Flight Following

    Good job, Larry. We've been keeping an eye on ya.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  7. #7
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: 2017 Fly-In Flight Following

    Oh, Oh. Looks like Larry left his wallet or credit card behind and had to go back to retrieve it.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  8. #8
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,027

    Default Re: 2017 Fly-In Flight Following

    Dang, I hope that is all it is about.

  9. #9
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: 2017 Fly-In Flight Following

    Maybe Larry went back to get AV8r Sed. Looks like Paul's tracker stopped at the same place Larry went back to (MoBridge, S Dakota)
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  10. #10
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,196

    Default Re: 2017 Fly-In Flight Following

    I been watching this also. seems Larry took off after Paul got there. I think you are right, they all met up and left out together and Paul left his plb off.
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •