Quote Originally Posted by Esser View Post
Has anyone reversed one of the fans and drilled holes in the glare shield for defrost?
Several years ago I helped a friend finish his series 5. His plan was Alaska flying and wanted defrost. I made a fiberglass - J shape that would capture a bit of the downward forced air and direct it up and through the glare shield. It was made by carving the desired shape in foam, covering it with fiberglass then carving out the foam. It was on whenever the heater was on. Actually there were two parts connected by a length of SCAT tubing. The top fitting was fabricated the same way and took the round from the SCAT tubing and reshaped the flow to a long oblong to direct the air across the windshield.