Carbon fiber cowlings Mk2 Kitfox

[firesteve]

Here in the Uk only the Mk 1&2 Kitfox is eligible to be flown as a microlight. I managed to find a Kitfox 2 for a reasonable price but was looking a little tired from when it was built way back in 1992. The aircraft had undergone a refit in the engine department having had a Jabiru 2200a fitted by the previous owner. Although the engine had been fitted very well other parts of the aircraft affected by the retrofit, namely the cowling were not so nicely done.
As I'm sure you are aware the fitting of a Jabiru engine involves extending the nose of the aircraft by four inches, extra fiberglass had been added but the whole thing just didn't sit right!
I decided early on that I would go for a more 'modern look' and attempt to construct my own cowlings from carbon fiber, he is how I'm getting on so far,,,
IMG_0179.jpg
Aircraft as purchased, nice flames!!!
DSC_0222.jpg
Cowling with stickers removed, not the nicest of finishes!
DSC_0229.jpg
Plug taking shape, experimenting with designs.
DSC_0232.jpg
Top cowling plug to rough shape.

[firesteve]

Having made the rough plugs from expanding foam and finished with car filler, molds in fiberglass were made in order to make fiberglass 'intermediate' plugs. By doing this it allowed the plugs to be fitted to the aircraft and allowed much more manipulation as the fiberglass is much stronger.
Once I was happy with the design i finished the detailing using car body filler and another set of molds were cast from these plugs in order to facilitate replication in carbon fiber.DSC_0247.jpg

DSC_0246.jpg

DSC_0248.jpg

DSC_0250.jpg

DSC_0251 1.jpg

[firesteve]

Once I had made the molds of the 'intermediate' plugs I was ready to lay up the carbon fiber,,,

DSC_0256.jpg

DSC_0260.jpg

DSC_0269.jpg

DSC_0270.jpg

DSC_0271.jpg

The finished articles is extremely strong coupled with the fact they are also extremely light! They are going to be painted which is why we did not take too much time on the aesthetics with regards to the 'lay up' of the carbon.
Next step is to remove the engine, bulkhead and strip the old paint off the tubing. The fixings for the cowlings will be sorted once the new bulkhead has been fitted.

[David47]

Yes the original engine cowling looks a bit sad. But very nice job on the new carbon cowl. Making molds, especially from scratch is a bit of an art form, and the cowling lines you've adopted make the front end look much more contemporary. Congrats on the work you've done and on the new look.

[HighWing]

Very impressive work and the design is really nice too. I suspect you have some experience with composites. The vacuum system likely saved a pound or two at least. These are the times I wish we were all living within walking distance, or at least Kitfox distance. It would be great seeing it in person.

[DesertFox4]

Excellent work Steve. I am just getting a small taste of carbon layup. Interesting process. Lots of work with very satisfying results weight wise. Congrats.

[efwd]

That is very nice. That changes the airplane entirely in my opinion.
Eddie

[TJay]

So what does a Carbon fiber cowl weigh?

[jmodguy]

Looks great Steve! I can attest to your struggles as I did the same with my Series 5. Lots of work that you can be proud of. And it’s DIFFERENT!!!!!!