Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: engine problems 912 UL

  1. #11

    Join Date
    Sep 2008
    Location
    Mt Pleasant, IA
    Posts
    1

    Cool Re: engine problems 912 UL

    I have experienced a loss of power and rough running at 4800 rpm on takeoff, pulled the throttle back and the engine smoothed out. Thoroughly cleaned all passages, replaced O-rings, gaskets in both carbs, new needles, floats and brackets, flanges, new fuel pump, fuel and fuel lines. No change. Considered taking up golf in place of flying!!!

    But...a friend and mechanic recommended pinching the line from the primer to the left carb suspecting an over-rich condition. That fixed the problem temporarily. Permanent fix was to replace both O-rings on the primer plunger. The O-rings were 27 yrs old (engine was new in 1993). Extra fuel was being introduced to the left carb through the primer line. The Rotax 912ul now runs like new. So be sure to replace O-rings every five years.

    Bruce O.
    Kitfox III, 1993
    Rotax 912ul
    Warp drive 3 blade prop

  2. #12
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,289

    Default Re: engine problems 912 UL

    Glad you had a positive outcome Bruce and an experienced mechanic/friend.
    Thanks for the heads up for those with primers installed.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •