Some kind words from you guys have prompted me to start this thread. I plan on posting some of the Modifications I have done mainly on Model IV number two, but possibly some from No. 1 also.
I welcome comments and the critiques that come to mind as well. Also if any of you have had the "Tinker" addiction prompt you to make mods, feel free to share
Since we all tend to start in the back, That will be where I will start.
Post Number 1 -
This will focus on the fairings and gap seals I put on the empennage.
I did it as well on 96KL, but this time a bit different in design. I wanted an airfoil from leading edge to trailing edge without the hour glass shape at the hinge lines. The vertical stabilizer to rudder was fairly simple as the rod end hinge design gave ample space for a complete arc on the leading edge of the rudder. The hinge at the horizontal stabilizer to elevator was the challenge due to the limited space provided by the welded tube hinge design. This required some real effort. I made up some molds to use to get several shapes I could use. Some fit as molded, some needed trimming and re working while in place to provide an unencumbered range of movemtent - both vertical and horizontal. All ribs were fabricated from 1/4" LAST-A-FOAM from ACS. After cutting, the foam was coated both sides with a medium weight fiberglass cloth and epoxy resin. After final trimming, the edges were coated with "Micro" and sanded smooth.After covering, I did riblace for reasons that will be explained later.