Well guys installing a O 290 in a model V anyone out there done this??
Well guys installing a O 290 in a model V anyone out there done this??
I remember that it has been done. I do not remember who.
Maxwell Duke
Kitfox S6 IO-240 Built it (Flying since 2003)
Maule M7-235C Sold it (liked it though)
RV-10 IO-540 Bought it
Zenith CH-750 Built with 7 friends (DAR Vic Syracuse)
Go for it! is it a G or D series engine?
I believe there are some out there.
Jeff
KF 5
340KF
It is a 0-290 G Lycoming with a little bit of work inside
You might want to do a google search on "O-290G crankshaft flange". Some say it is not suitable for an extension and a prop.
ACS used to sell a flange stiffener but not any more. Some have gone to their local machine shop to have them made. Look around a bit and make sure you do it right. When the fan stops running the pilot starts to sweat... Not good!
Jeff
KF 5
340KF
I have an O-290-D on mine so if you have any questions feel free. You do want to address the flange issue on the G engine. The extra weight can be addressed with sweeping the wings forward a bit. Overall it's a sweet set up, I love mine.
Bryan
Project Kitfox
Bowen Aero LLC
Kitfox Model 5 Lycoming O-290 D powered
Building a Model 7 Apex powered
Redding, CA
http://www.youtube.com/c/ProjectKitfox