I wonder how those grasses would handle the heat in Kentucky.
I wonder how those grasses would handle the heat in Kentucky.
Bob & Debbie
KF IV N1670B
Campbellsburg, Kentucky
Hi, for my runway (1800'x90') a Farmer with his big tractor plow and make two ditch in same time,after i work the earth with 39' rail from railway,i weld to Big chain on it i work with it at 45 degree, like that i fill a lot of big dépression.
After i put ''B'' mixture.. I wait one summer without cutting the grass.now i need to roll with heavy roller to remove all small bumb... Good luck
I built a 100 by 1200 foot runway a few years back on my farm. The best advise I have for you is to take what ever time and labor you have and get it as smooth as possible. It took 3 of us 6 long days to move dirt, level, roll, stone rake and hand rake. After seeding we did not use it for 3 months. We seeded in early May here is Pa. The next year we rented a vibratory roller to smooth out the winters freeze and thaw. We still roll the airfield every spring with a field roller we made that we pull behind a tractor.
Good luck it's hard work but worth it in the end.
Jim
About 8 years ago my father and I built my runway. I needed a large amount
Of fill dirt so I enlarged my pond using an old crane and large dump truck.
Once the fill was in place,we used two bulldozers to level it out. For final
Grade I built a pull behind grader of sorts. I used an old boat trailer,moved the
Axle all the way back,then mounted an adjustable 20"x8"x20' I beam.
I could adjust the front lip of the beam up and down to cut the humps
out as needed. Worked great. In this area we have clay and stones.
Mean stuff to do anything with! Also used the grader to push the stones to the sides for easier picking.
Took 3 to 4 years to get nice grass on it. Lots of work but worth it!![]()
I added about 500' to my existing runway last summer. Here are some of the tools I used. D-6 cat, 40' log trailer flipped upsidedown, with 3 16' channels welded to the (then) bottom, pulled with the D-6, and a home made grader. It's about 26' from the hitch to the center of the wheels, it's mostly made from a truck frame. The cutter blade is about 9' long channel cut from a truck frame. I pulled the grader with my 50 HP Kabota tractor. Raised and lowered the hitch to adjust the cut of the grader. Used it for the final grading after pulling the log trailer with the cat. Moved lots of dirt with the cat beforehand in very hard MN clay. JImChuk
As already mentioned, the most suitable type of ground cover will best be determined with help from local sources. As for ground prep, a lot depends on what you are starting with. However, when it is time to seed, if at all possible use a Brillion or Brillion type drill (seeder). It will do the best job of giving the grass seed good ground contact while smoothing and packing the surface. It will also break up small clods and help push down small rocks.
I moved from California to Indiana when my mother in laws husband died in his Bonanza here. I now take care of the 1800' x 100' strip. Still working on the Kitfox. But the grass here is a very wide leafed, coarse, and fast growing grass for the most part. They did a lot of work getting the runway back in shape after they bought the place in '97. Including rolling it with a big asphalt roller. It's still pretty smooth. I have had a couple visitors fly in with no complaints. If you want to fly/drive up from KY and get a taste of mowing a runway, I'll turn you loose with a mower.
Google:
Newby Landing
36II
I would kill for access to a D5! Y'all have some amazing toys to play with. My pasture is not flat, but it is pretty smooth. I'm looking for a disk I can use to help smooth it still more. A seed drill would help me get a better grass established.P1010376.jpg
It's in my AP's shop getting an annual at the Madison, Indiana airport.
20160828_123918.jpg
Bob & Debbie
KF IV N1670B
Campbellsburg, Kentucky
I built a 2450 x 75 runway on a 60 acre parcel of land I own here in central Wisconsin. I spent most of a summer on a Ford 8n with a grader blade and a drag, in addition I rented a small bull dozer and a large front end loader for a few bigger hills I had to take down. After doing twelve million circles with a drag with a couple bed springs behind it, it turned out super smooth. Planted it with rye, red fescue and Kentucky bluegrass. It's a great strip on a spectacular piece of land.
But ever since my discovery of bigger tires (and lake living and floats) I don't even mow it any more
Note, that Kitfox on my runway is Jim Shnowske's beautiful Speedster with Jim and Paul Buss (owner of a 912ul Avid Mark 4) standing next to it.
Last edited by av8rps; 06-24-2017 at 06:22 AM.