Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 1196

Thread: EFWD Build

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default EFWD Build

    OK, I am going to post questions earlier in hopes of not having to fret over trial and error work. I am working on centering the flapperon in the jig and before I use an entire tree remaking the jig until I get it right I am wondering if someone might have a trick to drilling the spar hole so that when the flapperon is placed inside the block, the leading edge and trailing edges line up. I have drilled the spar hole right in the center of the seam but as you can see it does not align the edges correctly.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •