All Right, lets see if I can get my question asked without confusing you all.
When covering the Rudder with Fabric (Im using Oratex but it should apply to everyone in all likelyhood) when the fabric covers the fiberglass leading edge how is the fabric dealt with with regard to the holes that accommodate the hinges. Do I cover then trim the holes out entirely or do I make cuts and fold the fabric into the inside of the fiberglass leading edge. Again, with Oratex I will be using heat activated glue and Im not able the use an iron on the inside to press it down. I believe the heat gun will need to be used and then I quickly fold over the fabric and press it down with my gloved fingers. Im betting John will be able to advise me.
Eddie