what are people using for static source
D Kelm
what are people using for static source
D Kelm
D Kelm,
I fabricated a fuselage fitting to locate on the fuselage fabric at the design location of our S7. Basically some off the shelf brass fitting parts, shaped and drilled for the airstream exposure side with a disk soldered on for fabric bonding. On the back side the fitting selected made for an exact size for the static line. Don't have a photo..sorry.
Dave S
Kitfox 7 Trigear (Flying since 2009)
912ULS Warp Drive
St Paul, MN
I used the static port kit available from Kitfox as an option. Has the fittings, tubing, external port, and instructions for location and mounting. Location is low on the left side of the fuselage, just forward of the lifting handle (SS7).
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
I used the static ports with threaded side for tubing connector from Aircraft Spruce. I riveted them to a 3" diameter aluminum plate and installed one on each side of the fuselage in the location noted by KitFox.
I'm painting the fuse now, or I'd send you a picture....
http://m.aircraftspruce.com/catalog/...aticports2.php
-Mike Kraus
RV-4 built and sold :-(
RV-10 built and flying
KitFox SS7 built and flying and now on amphib floats!
I have the Kitfox kit but no install info or location
where is the location in the manual was sure I saw it but not able to find it now
D K
DK its not in the manual. The install info comes with the optional static kit, or maybe you need to ask for it. They can email it to you.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS