-
Senior Member
Re: First, Build a Shed
Hey Carl
I can tell you how I added more work to my center console install. When I was dealing with the forward flange it seemed the flange may have been bent a tad more than necessary. I allowed the console to sit deeper so that it contacted the tab on the firewall. This effectively leveled out the console a bit more and as a result the adjustable pedals and flap detent brackets sat further down. I then had to grind off about 1/16th inch of the brackets off so that when I pushed the button down on the handles the steel rod would not drag along the bottom of the brackets as I pulled the handle through its travel. In hind sight I should have taken some of the bend out or shimmed between the console flange and it mount tabs on the airframe. Hell, Im not sure now if I could have pushed the console forward or not. I would say try to mate the forward end of the console first maybe. Might have helped me out. All in all mine worked out well in the end.
Eddie
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules