Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 46

Thread: Norm's Model IV covering Progress

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Norm's Avatar
    Join Date
    May 2013
    Location
    Airdrie, North of Calgary
    Posts
    347

    Default Re: Norm's Model IV covering Progress

    Covered the sides and tail and put it away for today. Notice the snowblower safely tucked away under the tail. Chinook for the past couple days and the snow is melting but if I didn't have the snowblower I figure we'd get 10 ft of snow, so its my insurance against a big dump like the east coast got
    Attached Images Attached Images

  2. #2
    Senior Member Norm's Avatar
    Join Date
    May 2013
    Location
    Airdrie, North of Calgary
    Posts
    347

    Default Re: Norm's Model IV covering Progress

    So Far the back is uncovered. North of 49 is coming by for a visit tomorrow and in order to show him the Stewarts System I am leaving the last piece of covering off. Lots of tapes and then maybe shoot some paint.
    Attached Images Attached Images

  3. #3
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,567

    Default Re: Norm's Model IV covering Progress

    Looking good Norm.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  4. #4
    Senior Member Norm's Avatar
    Join Date
    May 2013
    Location
    Airdrie, North of Calgary
    Posts
    347

    Default Re: Norm's Model IV covering Progress

    Thanks Steve
    Gets me excited to see the covering go on. Gives me hope that it will see air under the wings, which are still in the hanger waiting for the old covering to be yanked off and recovered. 90 90

  5. #5

    Join Date
    Oct 2010
    Location
    Calgary, Alberta
    Posts
    56

    Default Re: Norm's Model IV covering Progress

    Nice job Norm ,
    Looking forward to tomorrow.

  6. #6

    Join Date
    Oct 2010
    Location
    Calgary, Alberta
    Posts
    56

    Smile Re: Norm's Model IV covering Progress

    A big thanks to Norm for showing me the ropes on how to 'fabric' and trusting me to not mess up all his good work. And after "class" he arranged for Kitfox Jim to take me up on my first flight in a Kitfox!!!😊 Thanks Guys for a great day!
    Here is a picture of Norm and my handiwork.
    Attached Images Attached Images

  7. #7

    Join Date
    Oct 2010
    Location
    Calgary, Alberta
    Posts
    56

    Default Re: Norm's Model IV covering Progress

    And here is Kitfox Jim and his Model V. Thanks again, Jim😀
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •