Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 35

Thread: Do it yourself, Cheap ADS-B, with Raspberry Pi

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Nov 2008
    Location
    KDKB (Dekalb, Illinois)
    Posts
    648

    Default Do it yourself, Cheap ADS-B, with Raspberry Pi

    Quite interesting thread over here at the Naviator forum, if anybody's
    into computer stuff, etc. This is actually a pretty simple device to build,
    and for probably under $100 you can get ADS-B IN for about an afternoon
    projects worth of fooling around. It's not totally robust yet, but I bet with
    a few more weeks time it will be.

    http://forum.naviatorapp.com/viewtopic.php?id=1159

    Jeff

  2. #2
    Senior Member rv9ralph's Avatar
    Join Date
    Aug 2014
    Location
    Greenleaf, ID
    Posts
    620

    Default Re: Do it yourself, Cheap ADS-B, with Raspberry Pi

    There is a similar project for ADS-B in on the EAA Website, here:
    http://www.eaa.org/en/eaa/aviation-c...less-than-$120

    Ralph

  3. #3
    Senior Member
    Join Date
    Nov 2008
    Location
    KDKB (Dekalb, Illinois)
    Posts
    648

    Default Re: Do it yourself, Cheap ADS-B, with Raspberry Pi

    Two documents for the same project basically, Raspberry Pi, with Stratux
    installed.

    Can't wait for somebody to come out with the FAA legal Raspberry Pi
    $100 ADS-B "Out" version.

  4. #4
    Senior Member cubtractor's Avatar
    Join Date
    Jul 2011
    Location
    Carl Junction, MO
    Posts
    241

    Default Re: Do it yourself, Cheap ADS-B, with Raspberry Pi

    I built one. I have the GPS and AHRS chip wired in to mine. Not that I needed the GPS and AHRS but I like to tinker. It works really well.
    Mike Bentley
    Model IV-1200
    Jabiru 2200A #438
    Rotec Aerosport LCH Heads
    Ellison EFS-2 Throttle Body
    Prince Prop (64x34)
    My SPOT Page

  5. #5
    Senior Member
    Join Date
    Nov 2008
    Location
    KDKB (Dekalb, Illinois)
    Posts
    648

    Default Re: Do it yourself, Cheap ADS-B, with Raspberry Pi

    Lot's of different links, and docs out there. Which did you follow for the AHRS/GPS? Could you post the links?

    Thanks!
    Jeff

  6. #6
    Senior Member cubtractor's Avatar
    Join Date
    Jul 2011
    Location
    Carl Junction, MO
    Posts
    241

    Default Re: Do it yourself, Cheap ADS-B, with Raspberry Pi

    I started with the simplest unit, ADS-B UAT978. I had just under $100 in it. Then added the second dongle for the 1090es frequency. The 1090es isn't really needed for flight below 18,000 ft, plus it takes more power to run it with the second dongle. Supposedly after the end of this year, the FAA will transmit all 1090es information over the 978 UAT frequency anyway. I then added the AHRS chip. I'll add the links I found most useful below. You might search around and find the components cheaper, this is just a easy reference list.
    The battery pack listed below is ok if you are running a single dongle but it doesn't provide enough power with 2 dongles. You can search the reddit forums for better packs. I can also run it off of usb power in the plane as long as the usb output is at least 2.4 amps. I'll list the cig adapter I use.

    http://www.amazon.com/dp/B00MV6TAJI/ref=cm_sw_su_dp

    http://www.amazon.com/dp/B00P2UOU72/ref=cm_sw_su_dp

    http://www.amazon.com/dp/B00JM59JPG/ref=cm_sw_su_dp

    This article is an easy explanation.
    http://www.eaa.org/en/eaa/aviation-c...less-than-$120

    http://www.amazon.com/gp/product/B00...ilpage_o03_s00

    http://www.ebay.com/itm/181566850426...%3AMEBIDX%3AIT

    That should get you started. If you need links to wiring, etc. let me know.
    All of the information is at the following 3 links.

    https://www.reddit.com/r/flying/comm...ght_or_pretty/

    https://www.reddit.com/r/flying/comm...ght_or_pretty/

    https://www.reddit.com/r/stratux/
    Mike Bentley
    Model IV-1200
    Jabiru 2200A #438
    Rotec Aerosport LCH Heads
    Ellison EFS-2 Throttle Body
    Prince Prop (64x34)
    My SPOT Page

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •