Engine Instruments

[kitfox2009]

Hi all
I am considering modernizing the engine instrumentation on my 1999 Vixen UL 912.
It is becoming increasingly difficult to find replacement sending units to match up with the Westac gauges so maybe I should join the digital age.
I am looking for suggestions from the users on the forum in order to replace the round oil pressure and temperature, fuel pressure, EGT CHT , voltage and coolant temperature. New manifold pressure might be nice as well.
Is there ONE reasonably priced reliable unit that would replace all of the above? Approximate cost would be helpful.
I don't really want to change over to a complete glass cockpit,hopefully just engine monitoring.
Would appreciate experiences and suggestions.
Thanks
Don

[DesertFox4]

Don, I've had excellent service through two Kitfoxs and 2500 + hours flight time using Grand Rapids Technologies EIS. They have a model specifically for a Rotax and all the engine monitoring features you would need. A very nice option is the fuel flow feature for around $300.00 extra over the basic unit. You may also add altimeter and VSI and really clean up your panel. I've had great customer service from them the two times needed. Both were compitantly delt with right over the phone.
The only draw back is the readout is rectangular in shape and would require some panel reworking.
If you would like to retain that very nice looking panel, you should give our sponsor MGL's website a good look. They have both 3 1/8th & 2 1/4" digital engine instruments that would drop right in your existing holes.

[rv9ralph]

After the needle for the coolant gauge fell loose, I decided it was time to replace my Westec quad instruments on my KF3. I purchased the MGL 3 1/8 in instruments that i will be installing this weekend. The E1 EMS has 4 thermocouple channels and 2 pressure/temp channels. It also gives the bus voltage, RPM and Hobbs. I also purchased the TP-2 which has 2 channels for pressure temp. My plan is to put the coolant and oil temp on the TP-2. And 2 EGT, 2 CHT, Oil Pressure and voltage on the E-1.
I can't tell you how well they work yet, but MGL in their US office in Torrence, CA was very helpful in answering my questions before purchase.

Ralph

[TahoeTim]

When I was laying out my panel, I started with the same solution as Ralph. I ended up going with the MGL Extreme EMS to have it all contained in one gauge. I added the fuel cube and fuel pressure. The smaller footprint and the color screen tipped the scale for me over the mgl gauges and grand rapids.

[cap01]

I've had good luck with the Grand Rapids . I've got almost 800 hrs on mine and a friends speedster has more than that. the few little problems that we've had the Grand Rapids people have really good to work with. The fuel flow option was worth the money , only thing, you've got to remember to manually enter the amount of gas added after refueling

[3 tracks]

I have a 2003 Series 7, with the Westec Quad gauge. I'm having the same issue with needles jumping all over the place. I'm not the builder and limited experience with electronics. Considering replacing the Westec with the MGL E1EMS. I see rv9ralf. has done the conversion. Would he or anyone else like to comment on this? Like how difficult or easy this was to do.
Thanks John