Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Results 1 to 5 of 5

Thread: spacing between comm and transponder

  1. #1
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    zephyrhills,fl
    Posts
    625

    Default spacing between comm and transponder

    Im laying out my instrument panel. I have a icom a200 and a kt76a. I was going to put the transponder below the comm. There are air holes on top of the trans. Is there a minimal gap to leave between the two, or should i put the transponder on top of the comm ? Thanks, ken

  2. #2

    Default Re: spacing between comm and transponder

    no problem with our spacing
    Attached Images Attached Images
    Dj Series 6

  3. #3
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    zephyrhills,fl
    Posts
    625

    Default Re: spacing between comm and transponder

    Thank you for the nice pics. Mine will look very similar. Ken

  4. #4
    Senior Member
    Join Date
    Jul 2011
    Location
    milwaukee wi
    Posts
    489

    Default Re: spacing between comm and transponder

    You will find that most Cessna and Piper spacing is similar to what I did, about 1/8" between bezels.
    Attached Images Attached Images

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Location
    Garland, Texas
    Posts
    1,493

    Default Re: spacing between comm and transponder

    My Factory Built SLSA they go in one large hole. The com works well, no issues.
    Attached Images Attached Images
    Paul Zimmermann
    LSRM-A
    Kitfox N703KA (Sold)
    Texas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •