LED Strobes/ Nav Lights

[jdmcbean]

Good Morning..

We (Kitfox Aircraft) are distributors for both the Aero Pulsar and the GS-Air... We have had the Proto-Type Aero Pulsars on the factory aircraft since July and they are a nice unit with a clever install. The new lenses are very clear although the proto-type ones need to be replaced. The non-Tso'd units are $650...

GS-Air is sending us a set of proto-types as well.. should be here next week. Will let you know what we find out.

[Dean_aeroleds]

Hello Everyone,

I just joined this forum, and am available to answer any questions you might have about our products.

Dean Wilkinson
CTO, AeroLEDs LLC

[Dorsal]

Dean,
Welcome, it is great to have manufacturing reps on the site. I bought a pair of your wing-tip nav/strobes, my plane is not flying yet but they work great in the shop.

[DesertFox4]

Welcome Dean. Enjoy the site.

[DanB]

Hi Dean and welcome to the site. I was looking on the Vans Site recently and noticed a post you made there. It had some great shots of your nav-lights as well as landing lights taken at AirVenture this year. I enjoyed seeing them and wondered if you could place those here as well? I know most are shots of RV's but it could give some ideas to the Kitfox community as well. Thanks

[Dean_aeroleds]

Dan,

It appears that I am limited to four photos per post, so I will have to submit several posts to show you these pictures:

This is the AeroLEDs 1600 installed in the Remos GX:


Here is the new Pulsar NS90 installed in a newly completed RV8:


Here is a short video clip of the Pulsar NS90:
http://www.razorsedgesoft.com/PulsarNS90RV8.MP4
Here is a video clip of Aveo strobes on the Dynali helicopter and the My Sky MSONE:
http://www.razorsedgesoft.com/AveoDy...oLEDsMySky.MP4

[Dean_aeroleds]

This is the My Sky One with the Pulsar EXP and Sunlite:



Here is a video on the My Sky website that shows the Sunlite wig-wag and Pulsar EXP in flight:

http://www.mysky.aero/video-takeoff-...aft-msone.html

[jdmcbean]

Here are some other pics as well... Also there is no power external power supply needed.. just wire, switch and fuse.