Ross,
On my gear I etched, alodined, used epoxy primer and then finished with a urethane paint.
FYI we have had powder coating crack & chip on the gear legs of a Cessna 206 where I work. Powder coating is not very flexible.
Ross,
On my gear I etched, alodined, used epoxy primer and then finished with a urethane paint.
FYI we have had powder coating crack & chip on the gear legs of a Cessna 206 where I work. Powder coating is not very flexible.
Phil Nelson
A&P-IA, Maintenance Instructor
KF 5 Outback, Cont. IO-240
Flying since 2016