Yeh, they look pretty good.
It would be nice to get the oil temp above 212 F . The cyl head temp sensors are on cyls #2 and #3 , they look good.
I have an inflight adjustable prop and have found that with loading the prop/engine I can make the egts change , adding pitch lowers the rear two and raises the front two egts. If I had temps as in your picture, I would increase prop pitch and could get them pretty close to even on all four egts . Too much pitch the front go higher than the rear.
This is what I have noticed with my dynon 120 ems , 4 egts.