Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Heavy Wing Problem

  1. #1

    Join Date
    Mar 2014
    Location
    Richmond, BC
    Posts
    9

    Default Heavy Wing Problem

    Hi there, I need some advice.

    After a major renovation project , my Safari is up and flying. However I have a "heavy" left wing.

    I can compensate by adjusting the flapperon push tube settings, but it results in both flapperons not being level with each other at the center stick position.

    If I adjust the wing strut settings do I only do the heavy wing side or both sides, one out and the other in the same amount of turns, and do I only do the leading edge strut or both leading and trailing edge struts?

    Thanks in advance for any suggestions.
    Gary - AV8RBC
    Safari TD
    912ULS Warp Drive

  2. #2
    Senior Member
    Join Date
    Feb 2012
    Location
    Tahoe
    Posts
    336

    Default Re: Heavy Wing Problem

    I'm no expert but I would measure both wings for dihedral and twist (mainly twist) and then adjust accordingly.

    There are some old threads here if you search for heavy wing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •