-
Re: What props are available for the 582?
Will a 60/40 prop two blade wooden Culver that came off a Rotax 447 work with the 582 on the Model 4?
Gil
-
Re: What props are available for the 582?
It will bolt on, but it's not near enough prop for an engine that is producing 1/3 more HP than it was meant to work with. The 582 would over rev, and an over reving two stroke engine will have very high EGT temps. The high EGT temps will melt the pistons. Short answer would have been no. Jim Chuk
-
Re: What props are available for the 582?
What are most people using for a prop on their 582 with B box?
-
Re: What props are available for the 582?
I'm very close to Leaf Aircraft, Lyons WI this week so thought I would pick up a prop for my project. Any suggestions for a model 3 with model 4 wings?
-
Super Moderator
Re: What props are available for the 582?
Warp Drive is probably the most popular. Very strong, economical and works very well.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
-
Re: What props are available for the 582?
Have you thought about swapping out for a C-Box that would enable more prop options and maybe a clutch ? I'm running 3:1 C with 72" GA Ivo medium and RK-400 clutch. My plane was being vibrated and shaken to pieces until I installed the clutch. Key bump start, low idle, fast warm up, glass smooth clutch engagement and painless shut-down.
-
Re: What props are available for the 582?
I really don't know all that much about the gear boxes,only one I had was on a Cessna 175. This two stroke thing is all new to me. Is there a large price difference?
-
Re: What props are available for the 582?
About a $500 difference between a new B vs. C gearbox. I'm sure a good used or used rebuilt C could be found for much less than new ($1600). Maybe call Airscrew Performance or Rotax Rick. The C would allow you to use a longer two or 3 blade prop than with the B box. The RK-400 is $550.
http://www.air-techinc.com/topic_no_...?ptid=1&pmid=1
-
Re: What props are available for the 582?
I'm curious about your knowledge-experience with other props. Sounds like you've tried an assortment. Also have you used the RK-400 clutch ? I would like to have tried a Prince P-tip on my 582 C 3:1 but opted for an IVO 72" GA so I could easily dial in proper RPM's. The Prince props are fantastic props (600hrs behind them) but you need to know exactly what pitch and length you need. Even then if P-tip you get does not hit targeted RPM range you'll end up sending it back for adjustment. I didn't want to potentially go through a long delay waiting on a prop. It can take months.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules