Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: bing carborator feul inlet fitting

  1. #1

    Join Date
    Sep 2009
    Location
    coquille oregon
    Posts
    137

    Default bing carborator feul inlet fitting

    My 912s came with 90 degree banjo bolt style barbed fittings to attach the fuel line to the Bing carbs.
    On the left side the fuel line is closer to the exhaust than I like on my Kitfox Model 4 installation and the aluminum tube going to the radiator does not allow rotating the Banjo.
    I am curious if anyone knows if there is a straight fitting available to allow for better fuel line routing.
    Thanks
    Herman

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Location
    Brownsburg, IN
    Posts
    544

    Default Re: bing carborator feul inlet fitting

    Hi Herman,
    Are you looking for straight hose barb banjo fitting? That's easy! What size is the banjo bolt that goes in the end and what size hose I.D.?
    Jay

  3. #3
    foxy's Avatar
    Join Date
    Aug 2011
    Location
    quebec city
    Posts
    18

    Default Re: bing carborator feul inlet fitting

    Threads in the carb is M8 x 1.

    That's what you're looking for.

    http://www.ebay.com/itm/Barbed-Threa...-/360749744482
    Jacques
    Series 5 Outback
    0-235 L2C

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •