Hi Jim,

Check out the pictures I have posted of my Series 7 at this link.

Wiring pictures gallery



You didn't say where your questions are?

I used only aircraft tefzl wire, tried to support it at any location where it can rub on structure. Label each wire so you know where it goes if you have to troubleshoot it later. I used an automotive blade fuse block to make power distribution easy. Then just wired it up one wire at a time. I used black zip ties to hold everything in place. Just put them on loose at first, then cut them off if you get too many wires going through a location. When you are done you can put new zip ties on to secure the bundles or on my current project I went back and laced the wires with waxed string to replace the zip ties.

If you have other questions ask away. Good luck with your project!