I have a Kitfox IV with Jabiru 1200 motor. Those with similar setups will know that the path of the carb duct from the air box to the Bing carburettor requires an undesirable turn so a very flexible but non collapsable duct is needed.
When I purchased the aircraft it had flexible aluminium duct which I now need to replace. This part is similar to the warm air inlet duct fitted to many 70's cars but the size I need is 2 1/4 ID.
Can any member direct me to a source for this as it is not available in Australia. Plenty of 2" but no 2 1/4".
I have tried other setups with silicone bends and scat tube but these cannot give me the flow that the Al tube did.
Appreciate any help.
Ausfox