Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 2 12 LastLast
Results 1 to 10 of 66

Thread: Kitfox Enclosed Trailer

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Kitfox Enclosed Trailer

    just a precaution,..don't tell them your hauling an airplane ,..I can imagine the person on the other end of the phone call picturing a 747 ha ha ha ha

    actually most people do not know the wings can fold back on some aircraft,..so the picture an airplane on a trailer,..wings out .etc..
    Last edited by SkyPirate; 05-24-2009 at 09:52 AM.

  2. #2

    Join Date
    Oct 2008
    Location
    Zephyrhills, FL and Houghton Lake, MI
    Posts
    78

    Default Re: Kitfox Enclosed Trailer

    I use an enclosed trailer to haul my kitfox and haven't had any trouble with rubbing the sides. My trailer is 8'6" wide, legal in all states, and works great as a hanger when parked in a tiedown spot (I did exactly that for a winter in Florida. They charged me $30/month for the spot)

    I put straps over the wheels to hold the mains and support the tail with a stantion that I made. That keeps the plane from moving around, but I was also concerned about the fuselage swaying as the trailer bounced. I attached eyebolts to the trailer floor under the planes forward float fittings and use ratchet straps to go from the float fittings to the eyebolts. That stops "body sway" and makes it impossible for the wings to bump the sides of the trailer.

    I have about 3000 miles on it with NO RUBS.

  3. #3
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Kitfox Enclosed Trailer

    sounds good to me ,..3000 miles of michigan roads ...thats a test in itself

  4. #4
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Kitfox Enclosed Trailer

    I know the dimensions are probably listed somewhere on the kitfox site for the kitfox in wings folded config,..a wild guess here ..at 7'10? maybe 8'2"?
    I'll have to check



    7'10" on the model 4,.I didn't check the 5,6 or 7 but I think they are the same. so depending on the wall thickness of the trailer ..its 8 inches less then the "legal" limit of 102" a 1.5" wall still leaves 5 inches,..2.5" on each side,.a little tight,..
    I have thought of building a enclosed trailer with hexagon view from the rear,..bowing the wall out an extra 2 or 3 inches at the hieght of the wing . I stil might .
    Last edited by SkyPirate; 05-25-2009 at 03:46 PM. Reason: actual measurement

  5. #5
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,569

    Default Re: Kitfox Enclosed Trailer

    Model 4 dimensions wings folded:

    Wings Folded Length 21’-6”
    Wings Folded Width 7’-10”
    Height 5’8” Tail Wheel
    Height 8’-0” Tri-Gear


    Model 7 Super Sport dimensions wings folded:



    Wings Folded Length 22’-7”
    Wings Folded Width 8’-0”
    Height 5’8” Tail Wheel
    Height 8’-0” Tri-Gear


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  6. #6
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Kitfox Enclosed Trailer

    Thanks Desertfox4 so the 7 is wider

  7. #7
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Kitfox Enclosed Trailer

    Vetdrem,
    What is the make of your trailer or is it custom?
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  8. #8

    Join Date
    Nov 2017
    Location
    San Juan Capistrano
    Posts
    1

    Default Re: Kitfox Enclosed Trailer

    Quote Originally Posted by SkyPirate View Post
    actually most people do not know the wings can fold back on some aircraft,..so the picture an airplane on a trailer,..wings out .etc..
    That would certainly make the load of the trailer lighter.

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Location
    Garland, Texas
    Posts
    1,476

    Default Re: Kitfox Enclosed Trailer

    Here is a Trailer Supplier that builds trailers specifically for Airplanes. My previous airplane a Series 7 SS fit in one.
    Attached Files Attached Files
    Paul Zimmermann
    LSRM-A
    Garland, Texas

  10. #10
    ohlhausenr's Avatar
    Join Date
    Jul 2014
    Location
    Hooks,Tx
    Posts
    39

    Default Re: Kitfox Enclosed Trailer

    Paul Z, I ordered one from Mark Sorenson for my Kitfox IV. Should be ready by first of April, I'll let you know if it meets my expectations.
    Ray
    Ray
    Kitfox V Lycoming YO-233

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •