Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: rear spar attach bolt washers?

  1. #1
    Senior Member Wheels's Avatar
    Join Date
    Oct 2010
    Location
    Spokane Wa
    Posts
    420

    Default rear spar attach bolt washers?

    I am putting the wings back on my Mod IV 1200. can't figure out if there is supposed to be a washer on that bolt or not. I have the manual but just can't find the instruction. Don't want the NTSB to say I broke it cause I left out a part.
    Thanks
    Wheels
    PS. torque value?

  2. #2
    Senior Member t j's Avatar
    Join Date
    Oct 2009
    Location
    Ellensburg, WA
    Posts
    861

    Default Re: rear spar attach bolt washers?

    The parts list in my manual lists only two washers for the rear spat attach bolts. that would be one for each side. I put none on top and two thick washers under the nut on each rear spar bolt. I needed two washers to align the cotter pin hole I did not use any measurable torque on the nuts. Finger tight.
    Tom Jones
    Classic 4 builder

  3. #3
    Senior Member Wheels's Avatar
    Join Date
    Oct 2010
    Location
    Spokane Wa
    Posts
    420

    Default Re: rear spar attach bolt washers?

    thank you TJ.
    Should be ready for engine test in a couple days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •