Wing Rotisserie

[dc910sn]

Thanks everyone for the replies.
I'm going try with using (1) one and half in. PVC pipe for the wing root
side, and (1) 2" PVC pipe on the wingtip side of the LE spar (on each stand) since it looks
like in the build manual the rivet heads are inside the root spars
Just trying to get ready for delivery so I can hang the wings up.
Thanks again,
Tumbleweed

[896tr]

I just went out and measured my rotisserie. I used 1 1/2" x 10" abs. The outside diameter of the abs is 1 7/8". The inside diameter of the spars on the series 6 is 2 3/8". I never had a problem with the wings staying exactly where I wanted them too while I worked on them.
Steve