my thought, if it's just one blade with the problem, possible bad blade. call warp and ask them.
also check your bolts and make sure you are not bottoming out before it tightens the blade. threads aren't long enough. might need to put on washers.
my thought, if it's just one blade with the problem, possible bad blade. call warp and ask them.
also check your bolts and make sure you are not bottoming out before it tightens the blade. threads aren't long enough. might need to put on washers.
Wheels,
Was this confirmed with a Dynavibe (or equal) digital balancer - Classic or preferably GX2 type?the balance is good with the low mid and full throttle points being smooth as silk
Greg
Confirmed by my hand on the controls. I will take the plane to the big city this month and they will balance the prop. I don't know what they use.