To cover watercooler during winter!?

[Olle1975]

Hi!

Has anybody mount a controllable cover for the watercooler to control the watertemperature during winterflight?
I have taped my cooler to get more temperature during winter but it will be nice to controll the covering for setting temperature.

Exists kits for ready to mount or has anybody an idea for easy building?

Pics will be welcome....

Regards

Olaf

[HansLab]

I just bought one of them thermostats. Wanted to be sure I don't have to get back to the field quickly due to high temps.
next maintenance I'll try to put it in.
Will supply some pics.

[kmach]

another option is the "thermobob" thermostat setup.

[JimS]

Mine,


JimS

[Olle1975]

Thanks for replys!

@Jim

Is this a homebuild version or did you bought it?

Could you post a pic from - how to mount the axle (hinge) of the sheet and the control inside the cockpit?
I think, you only need a rope to pull the sheet, because the wind will close it itself!?

Olaf

[JimS]

Olaf
Very simple flap. Aluminum sheet with a piano hinge rivited across the top. The hinge extends past the flap about an inch on each end and has one hole on each end that the bolts that mount the radiator go through to keep it in place.The rod that controls the flap just runs straight up through the fabric and floorboard to a simple lever that I have mounted to a piece of 1/4 inch wood that is zip tied to the angle tubes right next to the flap handle but on the opposite side. You could also use a cable control.Might work better than the lever I use.
JimS