I'd suggest performing a fuel flow test per this FAA Advisory Circular:

http://www.faa.gov/regulations_polic...a/ac90-89a.pdf

Also,
Quote Originally Posted by lburnard View Post
One other note, it doesn't seem to consume much / if any injection oil and it's all set up correctly. Should there be a filter between the tank and engine, it seems to restrict the flow quite a bit.
It should be consuming injection oil. Make sure the alignment marks are matched up between the injection pump arm and casting at low throttle. The arm should advance smoothly as the throttle is opened. You should have a filter between the injection oil tank and engine. It should be a stainless steel wire mesh type, not a paper or fiber element. This will prevent the filter blocking off if you get any water in the injection oil system.