More detail...( pic) of your trim tab..the cable...the control stick....
More detail...( pic) of your trim tab..the cable...the control stick....
OK...I'll take pictures and post....stay tuned
Ackselle
Kitfox IV 1200 Classic C-GIKV
29" Airstreaks, 11" Matco Tailwheel
ROTAX 912, Hoffman HO-V352F CS Prop
Thanks, that will be fine!!!OK...I'll take pictures and post....stay tuned
One thing to be aware of with the elevator trim tab is to make sure that you have thought carefully about the design, in particular the actuation of the tab. In the uk we have had a number of in incidents with control flutter when the actuation system has failed virtually always the aircraft has been uncontrollable and ended mKing a forced landing!
Dave Holl
Building Kitfox MK7
Rotax 912ULS
Olaf,
Here's a few pictures of my trim tab setup...
1) Trim Tab on the elevator
Trim Tab.jpg
2) Trim Tab actuator on the elevator
Trim Tab Actuator.jpg
3) Trim Lever in the cabin (beside the flaperon lever)
Trim Tab Lever.jpg
Prost!
Ackselle
Kitfox IV 1200 Classic C-GIKV
29" Airstreaks, 11" Matco Tailwheel
ROTAX 912, Hoffman HO-V352F CS Prop
Thank you very much!
Where did you get the trim lever, I can't find anyone in net?
Olaf
It looks like a phantom set up, or a ultra light trim kit, challengers have a similar system too
Chase
Model 5 OutBack
912 UL